Premier side and end-lap sealant is manufactured from EPDM foam, coated on either one or both sides with an aggressive pressure-sensitive acrylic adhesive, available in black as standard.
Applications include:
| SBE 100 | |
|---|---|
| Thicknesses (mm) | 1, 2, 3, 4, 6, 8 (other thicknesses available on request) |
| Density (ASTM D3575) | 100 kg/m³ |
| Flame resistance | FMVSS302 |
| Adhesive | Acrylic |
| Cell structure | Closed cell |
| Compression set (+23°C +/- 2°C) 22h at 25% compression : Measured after 24h (ASTM D1056) | 15% |
| Water absorption : Max weight change (ASTM D1056) | < 2% |
| Tensile strength (ASTM D412) | >250 kPa |
| Elongation – minimum (ASTM D412) | >200% |
| Temperature range (constant) | -30°C to +85°C |
| Temperature range (intermittent) | +100°C |
| Shore Hardness (00 Scale) | 35 – 40 |
| Environmental protection | CFC and HCFC free |
Please note: The above technical information is given as a guide and is based on test data obtained under laboratory conditions. Materials should be fully tested by the end user to establish suitability of the product for the intended application. June 2013