Sealprem Max Bond

Sealprem Max Bond

Sealprem Max Bond, based on Silyl-terminated PUR technology, adheres to all major building materials and is temperature, weather, and chemical resistant.

This new grab adhesive is a moisture-curing elastomeric sealant/adhesive ideal for weatherproofing and bonding.

Typical Applications

Applications include:

  • Use to joint cladding panels.
  • General sealing and bonding in the construction industry.
  • Bonding to both porous and non-porous materials such as glass, granite, concrete, plasterboard, fibreglass, and more.
  • Suitable for underwater applications.

Product Features

  • Bond to almost any surface, wet or dry, porous or non-porous.
  • Solvent-free.
  • Anti-slip.
  • Chemical resistant.
  • Suitable for both interior and exterior applications.

Enquire About Product

    Sealprem Max-Bond
    Specific Gravity1.5 ± 0.05
    Skinning TimeApprox. 15 minutes (at 23o
    C and 50% relative humidity)
    Cure RateApprox. 2mm per 24 hours (at 23o
    C and 50% relative humidity)
    As the joint depth increases, the cure rate will slow down
    Shore A HardnessApprox. 75 - 80
    Tensile Strength1.2 MPa
    Movement± 15%
    Application temperature +5°C to +350°C
    Service temperature-40°C to +90°C
    Shelf Life 10 months
    Life Expectancy20 years
    Coverage1 standard size cartridge is sufficient to seal approximately 10m with a 6mm bead
    ColourNatural (Other colours available where minimum batch quantities can be met)