Sealprem SGV15PL Foam Sealant


SGV15PL is primarily a foam compression sealant. The foam is predominantly closed celled and is very soft.

This acrylic pressure-sensitive adhesive is coated on one side, and the product has a removable polyester liner on the non‐adhesive face. SGV15PL will act as a water seal and air/dust seal when compressed. The product is grey, and is also available with a clear, removable polyester liner.

Ideal for applications in Metal Roofing & Cladding.

Specified by Kingspan and TATA. Recommended by Euroclad and CA Group.

Typical Applications

Applications include:

  • For preventing electrolytic corrosion. Forms a compression air and water seal
  • For cushioning
  • For creating an air seal eg. at panel joints
  • For gap-filling or irregular surfaces

Product Features

  • Clean to use / clean edge finish
  • Pre‐determined dimensional sealant reduces waste
  • No known hazards associated with this product
  • Suitable for indoor and outdoor environments
  • Resistance to abrasion, corrosion and moisture
  • Very good ultraviolet (UV) light resistance
  • Slit to order – many widths and thicknesses available
  • Polyester liner on the non‐adhesive face, reducing dimensional change during application
  • Good resistance to dilute acids and alkalis
  • Coated on one side with a high-quality pressure sensitive acrylic adhesive
  • Shelf life of 1 year from date of dispatch
  • Application temperature: +10°C to +40°C
  • Service temperature: ‐30°C to +70°C
  • Minimum 33% compression required to affect an air seal

Standard Presentation

  • Core: 76mm plastic
  • Format: Logs; Rolls; Die Cuts; Spools
  • Thickness: 9.0mm

The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10°C and +30°C. Under these conditions, the shelf life of the tape is 12 months from the date of dispatch.

Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.

Product may be applied by hand direct from a roll applying even pressure. Customers are recommended to make their own assessment of our products under their own conditions, for their own requirement.

Enquire About Product

    10 Minute 180° Peel Adhesion5N/25mm
    Compression Deflection After 1 Minute1.1Ncm-²
    Elongation at Break<170%
    Foam Density135Kg/m³
    Force to Compress 30%1.9Ncm-²
    Shore Hardness {OO} Scale20“OO”
    Tensile Strength28Ncm-²


    Data Sheet PDFHealth & Safety Sheet