H45FRB – Fire Retardant Polyethylene

Home > Fire Rated Products > H45FRB – Fire Retardant Polyethylene
Sealprem EPDM Profiled Foam Filler

H45FRB – Fire Retardant Polyethylene

Premier profiled foam fillers are designed to seal roofing and cladding profiles against dust, nesting animals, water and water vapour ingress. Our profiled foam fillers are made to measure – see below for info on ordering fillers to measure. The material is a fully closed cell cross-linked fire retardant polyethylene.

For best results, secure with Sealprem BR.

Typical Applications

Applications include:

  • Sealing eaves and ridge
  • Sealing hips and valleys
  • Sealing rooflights

Product Features

Premier fillers are supplied:

  • Made to measure
  • With extended base
  • Ventilated
  • In spacer and strip form
  • Angle-cut
  • The reaction to fire classification has been carried out in accordance with clauses 8, 9, 10 of EN13501-1:2007+A1: 2009

Bespoke foam fillers are cut with the latest water jet angle-cutting technology. Diagrams showing the features and terms used in foam fillers can be seen here.

Enquire About Product

    StandardValue
    Density (Kg/m3)ISO 84545
    Compression 10%
    Compression 25%
    Compression 50%
    (kPa)    		ISO 84475
    92
    154
    Working temperature range (°C)Internal-60 to +90
    Tensile Strength (KPa)ISO 1798388
    Elongation (%)ISO 1798201
    Thermal Conductivity at 10°C (W/mK)EN 126770.044
    Thermal Conductivity at 40°C (W/mK)EN126770.046
    Water Absorption Vol. (max)Internal1
    Shore 00ISO 86860

    Please note: The above technical information is given as a guide and is based on recent test data obtained under laboratory conditions. Materials should be fully tested by the end user to establish suitability of the product for the intended application.

     

    Filler Order/Enquiry Form PDFFiller Identification FormGuide to Profiled Foam FillersData Sheet PDFHealth & Safety Sheet